3par quorum witness guide

3PAR - no connection to quorum witness. February 1, 2019 by woifgaung, posted in HP, HP | Storage. Recently I had problems to connect a 3PAR system to a quorum appliance. The system had a connection to the quorum. After HPE support did replace a node, connection could not be established any more. No Communication on the Part of Quorum Witness with Site 1 and Site 2In a dual-network communication failure resulting in no communication between the quorum witnessand site 1, and between the quorum witness and site 2 (see Figure 59 (page 148)):•HP 3PAR StoreServ array A and B have both lost connectivity with the quorum witness.•Remote HP 3PAR Peer Persistence enables the transparent migration of application storage from one HP 3PAR StoreServ to another, maintaining business continuity for virtualized data centers.3 In the event of a failure in the source storage system, host traffic is redirected to the secondary storage system transparently and without major impact to the Today we did a failover test on the system and then failback, after this i can no longer start the quorum witness configuration on the 3par. The actual quorum witness server is running and respond on ping, i have not restarted the quorum witness server as of yet. Any tips on what could cause this? All RC groups have the exact same policy set on 3PAR Users Group A Storage Administrator Community: Board index » Members Area » General Discussion. I believe to remenber that I read in the documentation that PP for Windows needs a Quorum Witness running on Hyper-V, and will not work with a Quorum Witness running on ESX. HP 3PAR Operating System Software User Manual • Quorum-witness cli commands, Creating a quorum witness, Starting a quorum witness • HP Storage Manuals Directory ManualsDir.com - online owner manuals library 3PAR Users Group A Storage Administrator Community: #setrcopytarget witness create -remote Check the RCopy guide above from