Sinamics g120c pn manual meat

sinamics g120c rated power 1,1kw with 150% overload for 3 sec 3ac380-480v +10/-20% 47-63hz integrated filter class a i/o-interface: 6di, 2do,1ai,1ao safe torque off integrated fieldbus: profinet-pn protection: ip20/ ul open type size: fsaa 173x73x178(hxwxd) external 24v CU240S PN Firmware version V3.0 Parameter Manual · Edition 05/2007. Edition 05/2007 SINAMICS SINAMICS G120 SINAMICS G120 Control Units CU240S, Edition 05/2007 1.1 Introduction to Parameters The layout of the parameter description is as follows. Page 1 SINAMICS G120 Control Units CU230P-2 Parameter Manual · 01/2011 SINAMICS Page 3 Parameters Function diagrams SINAMICS Faults and Alarms SINAMICS G120 Appendix Control Units CU230P-2 List of Abbreviations Parameter Manual Index Valid for Control Units Firmware version CU230P-2 HVAC CU230P-2 CAN CU230P-2 DP A5E02297932B AD 01/2011 The SINAMICS G120 is a modular frequency converter for the most diverse requirements. The modular structure of the components and the wide power range from 0.55 to 250 kW ensure that you are always able to assemble the ideal converter for your requirements. This series of converters is available in three voltage variants for connection to 200 V, 400 V and 690 V networks. A standard web browser and a commercially available operating system are all you need. The user interface of the SINAMICS G120C Smart Access Module is simple and intuitive in its configuration and use. The Smart Access Module is available as an additional option for the SINAMICS G120C converter series with CU230P-2 or CU240E-2 Control Unit. industry.usa.siemens.com the warnings and operating procedures contained in this manual. Any defective parts or components must be replaced using parts contained in the relevant spare parts list. The SINAMICS G120C is a range of inverters for controlling the speed of three phase motors. The inverter is available in Subject to change without prior notice. Safety Notices This manual contains information that you should obs erve to ensure your own personal safety and prevent material damage. The notices referring to your persona l safety are highlighted in the manual by a warning SINAMICS G120C List SINAMICS G120C Rated power 0.55 kW with 150% overload for 3 sec. 380-480V3AC+10/-20% 47-63Hz Integrated filter class A I/O interface: 6DI, 2 DO, 1 AI, 1 AO Safe-Torque-Off integrated Fieldbus integrated: PROFINET PN Degree of protection IP20/UL Open Type Variable: FSA 196x 73x 225.4 (HxWxD) external 24 V sinamics g120c rated power 15,0kw with 150% overload for 3 sec 3ac380-480v +10/-20% 47-63hz integrated filter class a i/o-interface: 6di, 2do,1ai,1ao safe torque off integrated fieldbus: profinet-pn protection: ip20/ ul open type size: fsc 295x 140x 225,4 (hxwxd) external 24v instruction manual needed. Highlights of SINAMICS G120 Smart Access Easy and convenient access to the drive even in SINAMICS G120C PN /USS / DP SINAMICS G120, CU230P-2 PN /USS / DP SINAMICS G120, CU240E-2 PN /USS / DP Rated voltage 15V DC instruction manual needed. Highlights of SINAMICS G120 Smart Access Easy and convenient access to the drive even in SINAMICS G120C PN /USS / DP SINAMICS G120, CU230P-2 PN /USS / DP SINAMICS G120, CU240E-2 PN /USS / DP Rated voltage 15V DC Installation and commissioning of the SINAMICS G120C. This feature is not available right now. Please try again later. SINAMICS SINAMICS G120 Control Units CU240E CU240S CU240S DP CU240S DP-F CU240S PN CU240S PN-F Operating Instructions · 0