Robus pir sensor instructions for diabetes

pir motion sensor wiring diagram
robus security light
robus ru360 instructions
robus pir motion sensor instructions
robus motion detector instructions
robus flood light with sensor

The Robus R180-01 is a white, 180° motion detector PIR. It can be used to control up to a 1000W tungsten lamp, a 300W fluorescent lamp or a 150W LED load. The Installation must be carried out by an electrician. LED Group Passive infra-red sensor switch for lighting energy saving applications, ceiling mounted Max detection range of 12m at mounting height of 2.5m; Manual override facility with automatic reset after 8hrs; High load contact rating allows numerous fittings Robus 180° PIR Motion Detector Black Minimum load 25W; Manual override facility, with automatic reset after 8 hrs; Adjustable time delay (10 secs - 10 mins)ROBUS products from the LED Group are researched and developed with the customers involvement and must fulfil the brief of being quick and easy to install, Specification: Installation: Information for the Product user. Stand alone Passive infra-red sensor switch (PIR). Replacement for standard single gang wall switch. Wiring Diagram for ROBUS PIR Detectors I NTERNAL - OCCUPANCY I - MOTION Universal Recessed / Surface, 360° PIR LED GROUP, ROBUS Australia. Choose suitable location for mounting the sensor, mounting height is 2m to 2.5m or in Manual mode, switch off for 10sec and then turn on, the PIR will reset to. dimmable courtesy output to provide an attractive low level of light when no movement is detected. PARTS INCLUDED. - PIR Sensor unit. - Instruction manual.