Platon flooring protector installation instructions

basement wall drainage board
best exterior foundation waterproofing systemswhere to buy platon waterproofing
delta membrane
where to buy platon membrane
where to buy certainteed platon
dimple board for wall drainage

Platon is a rugged, dimpled high-density polyethylene (HDPE) membrane that keeps foundations and flooring dry. Platon creates an impermeable. Its like having an “above grade” floor ! • Remove existing floor coverings. • Level low areas if required. • Unroll first strip of Platon DIMPLES DOWN. • Cut to length. • Install second strip of Platon. • Smooth tab overlaps 2 rows of dimples. Step 4 - a. • Laminate underpad and flooring is installed. Step 4 - b. In situations where the Platon membrane installer finds that the (see also sump installation guidance notes in the appendix). Page 8. 7. 1.32 Drainage Channel. If the Triton Aqua Channel cannot be formed/inserted into the floor at the The general codes of practice for protection at work and instructions of the manufacturers Always install DELTA®-MS tightly and evenly over the foundation wall. ? For ease of . Floor slab is poured level with, rather than on top of footing.Install min. 7/16” OSB t&g subfloor over Platon membrane and fasten at room perimeter with concrete screws or nails; fasten where vertical movement occurs. F. Install laminate flooring over laminate underpad over Platon membrane following manufacturer's instructions for the laminate flooring. In situations where the Platon membrane installer finds that the only possibility It is fitted around the perimeter of the floor at the vulnerable wall/floor junction and can be used in (see also sump installation guidance notes in the appendix). Install your choice of flooring, Additional instructions specific to Platon subfloor installations are as follows: Vinyl Floor: Glue and staple 1/4" underlay (as recommended by the flooring manufacturer) over the second subfloor. Stagger the joints between the underlay and the subfloor. INSTALLING PLATON AS A FOUNDATION WRAP. MATERIAL from getting behind the membrane and clogging the air gap. . Note: Follow “peel and stick” manufacturers instructions for surface higher than the proposed floor thickness.