Mapam forward controls installation instructions

Remove the two hex socket bolts that secure the J-clip to the frame at the forward control mounting location. (Shifter side). 4. Remove pinch bolt from shift lever andInstallation instructions for FC13 Forward Controls for Kawasaki Vulcan 900. It is highly recommended that you use a thread lock compound such as Loctite Did I mention that there are no installation instructions? First let me say that I found Mapam's (restyling) forward controls to be a fine value considering that Apr 30, 2016 - Installing the Controls (Brake Side) First things first, mount the Mapam bracket to the Magna. Use the long bolt for the upper engine mount hole. Then use the original bolt that was in that hole for the lower bracket hole. Be careful screwing them in so that you don't strip anything. May 26, 2006 - I purchased my Restyling / Mapam Forward Control from Bikercom.com I downloaded the instructions from Bikercom.com when I ordered my Controls and read I did not find this out until later during the installation, and I did purchase other Sep 24, 2007 - Oct 20, 2014 -