Manual gcp 10000 power cr flex femoral component

SERVICE MANUAL CARESTREAM DIRECTVIEW VITA CR System Service Guide Document No.: 8H8442 Copyright Carestream Health, Inc. 2010 All rights Mains power quality should be that of a typical commercial or hospital environment. Vita CR System Overview and Component Descriptions. Direction data Powered by Google. Note: The components shall be positioned to avoid exces-sive hyperextension. Excessive femoral flexion and tibial slope should be avoided when implanting the components. Implant positioning resulting in excessive hyperextension may result in premature wear and damage to the implant. Autobind protocol - The transmitter will automatically initiate a bind sequence on power up or model/protocol selection. This is for models where the receiver expects to rebind every time it is powered up. In these protocols you do not need to press the bind button at power up to bind, it will Consult Depuy Synthes's entire Proximal Femoral (Hook) Plate catalogue on MedicalExpo. Features and Benefits The Synthes LCP Proximal Femoral Hook Plate 4.5/5.0 is part of the LCP Periarticular Plating System, which merges locking screw technology with conventional plating techniques. EN25F40-100GCP Datasheet. EN25F40-100GCP - 4 Mbit Serial Flash Memory with 4Kbytes Uniform Sector by EON. Название/Part No Three oxidized zirconium femoral components and three Co-Cr femoral components of identical geometry used in total knee arthroplasty were articulated against standard tibial components with modular tibial inserts made of noncross-linked ultra-high molecular weight polyethylene. The CR-Flex Femoral Component retains the condylar asymmetry of the normal distal femoral condyles, allowing external rotation of the femur as the flexion angle increases. This rotation is crucial in maintaining proper posterior cruciate and collateral ligament tension. Models with automatic stroke-end setting-up, three-pushbutton cutting power selector and two potentiometers to quickly select the cutting force according to the die size.