Clenergy tilt installation manual

This system allows installation on tile and tin roofs, as well as pitched and flat of roof penetration on concealed type roofs, and the adjustable tilt legs providecontacting Clenergy Australia by email on Sales@clenergy.com.cn, or your local representative in Australia,. Page 1 of 13. EzRack SolarRoof Code-Compliant Planning and Installation Guide (AU) V1.4. © Clenergy Co . Tilt Roof Mounting kit. Adjustable tilt leg kit contains front foot and back leg to tilt an ezRack solar frame Datasheet (155kB); 2: Clenergy EzRack Tilt Installation Manual (817kB) Please check the current version of the installation manual under clenergy.com.au. PV-ezRack SolarRoof Adjustable Tilt Legs - Installation Guide V2.0 clenergy.com.au. Email: sales@clenergy.com.au. PV-ezRack® SolarRoof™. Adjustable Tilt Legs. Code-Compliant Planning and Installation Guide. South Facing roof (Reverse Tilt) Max PV panel length: 2000mm. Type of Interface: 30?-60? Adjustable Tilt Leg Terrain Category 3. Please consult Clenergy for installing PV modules with a greater length than 2000mm. Each Foot should be fixed to the purlins using at least two screws through sheet metal roofs. Clenergy PV-ezRack® SolarTerrace III-A™ is a pre-assembled ground mount system SolarTerrace III-A parts, when installed in accordance with this guide, will be Region A, 30? tilt Region B, 30? tilt Region C, 20? tilt Region D, 20? tilt. directly or in conjunction with L-feet, tilt legs or SolarTripod. Please check that you are using the latest version of the installation manual, which you can do by the “SolarRoof Adjustable Tilt Legs - Installation Guide”, or eventually with “PV-ezRack to mount the Clenergy PV-ezRack SolarRoof interfaces such as tilt legs. I need to install some tilt legs on a Klip Lok (Ultra Deck) roof. There is no In the installation guide, you need to follow the spacing for “up wind, down wind”.