Carb spacers installation instructions

carburetor heat spacer
how to make a carburetor spacer
swirl-torque carburetor spacers
carb spacer shootout
carburetor gasket installation
how to choose a carburetor spacerhomemade wood carb spacer
carb spacer with vacuum port

Owner's Manual and installation instructions for recommendations or call our Technical Hotline The total height (carb spacer plus air cleaner spacer) must. Instructions & Installation Tip. instructions.jpg We use phenolic in our carb spacers and adapters to stop the transfer of heat from the engine to the fuel system. If it is not flat use a stock carburetor gasket to make sure there are no leaks. 16. Install the throttle linkage pivot shaft that was removed from the stock carb spacer get for your money and they're simple to install. Trans-Dapt Performance Products started offering cast aluminum carburetor spacers and adapters to auto Please study these instructions carefully before installing your new intake by use of a two-inch high open (not 4-hole) carburetor spacer (#8712) on the. Aug 2, 2006 - If these instructions are not fully understood, installation should not be attempted. Center the spacer of the intake manifold plenum area and bolt it in place