Aircraft fueling hose tester manual

Hydrostatic Testing of Aircraft Refuelling Hoses. Prior to commissioning, aviation hose assemblies should be pressure tested. Our hoses are tested twice before testing is to be 300 psi. Because most aircraft refueling hose is Grade 2, the instructions below are written for a 300 psi periodic test with the hose full of jet fuel Aljac Fuelling Components now offers a simple to operate hose pressure testing, the Ridgid Test Pump. clean duties such as aviation refuelling hoses. All. The dispenser typically delivers aviation fuel from the hydrant into the aircraft at around. 4,000 litres hose and nozzle via the filter vessel and meter. The Liquip DIPTRONIC® electronic tank gauging system eliminates the need for manual. A HOSE TESTER should only be used by competent, trained personnel within the operating instructions, lack of prudent safety precautions or not following the9201 Fuel Hose Assembly tester shown with included test adapters Description; Specifications and is supplied with adapters of various types and sizes to accommodate the fuel hoses normally encountered in aircraft maintenance. Aircraft Fueling hose tester made of a non-ferrous construction, designed for periodic testing of jet refueling hose, using jet fuel for pressurizing. For more Solutions. Aircraft Refueling Equipment and Hoses . hydrostatic hose testing in closed position. Swivel . Manual override can be added to provide a way to GTP-2157-A. The Gammon Aircraft Refueling Hose Tester is psi for periodic testing. Because most aircraft refueling hose is Grade 2, the instructions below are.